– The only Emulex utility supported on ARM servers is the Emulex HBA Capture utility. – To update firmware, use the Linux sysfs command. Refer to the section on updating firmware in the Emulex Drivers for Linux User Guide for details. – To configure driver parameters, use one of the following Linux tools. Emulex FCoE HBA - Storport Miniport Driver. Emulex LightPulse HBA - Storport Miniport Driver. Emulex OCe14102-U 10Gb CNA. Emulex OCl14102-LOM 10Gb CNA. Emulex OCl14104B-LOM 10Gb CNA. Emulex OneConnect OCe14014-U-T3, iSCSI Initiator. Emulex OneConnect OCe14102B-U1-D. Component Details; Filename: driver-emulex-lpfc-11.1.271.0.iso: File sha256: 49cf22b8f1a3ef45ec27f8a10d7dd5b891306c19a7e174b740e0b66521c3d1c4: Source Filename. The Emulex OneCore Storage SDK supports the Service Level Interface 4 (SLI-4) API and is compatible with the latest generation of Emulex 8 and 16 Gb/s Fibre Channel HBAs (LPe15000 and LPe16000 series), as well as the latest generation of 10 and 40 Gb/s FCoE UCNAs (OCe14000-series). To update your driver, download the latest Emulex driver and utilities from the Emulex Web site. From the main Emulex Web site, click Downloads, click your vendor and then click the link for your operating system (OS). Drivers for Windows. The drivers for Windows include support for Windows Server 2008 R2, Windows Server 2008.
- Emulex Drivers For Linux
- Emulex Lightpulse Hba Driver
- Emulex Drivers For Linux
- Emulex Drivers For Vmware Esxi User Guide
- Emulex Oneconnect Driver
- XenServer 7.1 LTSR Cumulative Update 1
- XenServer 7.1 LTSR Cumulative Update 2
- XenServer 7.1
Emulex Drivers For Linux
Who Should Install this Driver Disk?
Download hagiwara port devices driver. Customers running a Citrix XenServer 7.1 LTSR Cumulative Update 1 or Cumulative Update 2 who use Emulex's be2net driver and wish to use the latest version of the following:
| Driver Module | Version |
|---|---|
| be2net | 11.2.1226.2 |
Issues Resolved In this Driver Disk
Includes general enhancements and bug fixes.
Installing the Driver Disk
Customers should use XenServer Command Line Interface (CLI) to install this update. Once the driver has been installed, the server must be restarted. As with any software update, Citrix advises customers to back up their data before applying this driver disk.
Emulex Lightpulse Hba Driver
Please note that the attachment to this article is a zip file. It contains both the driver disk ISO mentioned below, and the source code for the driver. The zip file should be unzipped (to produce the driver disk ISO image), before carrying out the steps below. The source code file is not necessary for driver disk installation: it is provided to fulfill licensing obligations.
Installing as Part of a Clean XenServer Installation
- After you have selected your keyboard layout at the first installer prompt, you will be presented with a welcome screen. At this point, press F9 on your keyboard, and insert the CD with the driver disk in it, or use one of the other methods such as installation over the network.
Note: If installation over HTTP or FTP is to be used, the ISO image must be unpacked at that location (i.e. the installer expects to find the contents of the ISO at that network location, not the ISO itself). - The installer will proceed to attempt to load the driver. If this is successful, you can continue with the installation as normal. Near the end of the installation, you will be prompted to re-insert the driver disk (otherwise known as a XenServer supplemental pack) so that the driver can be installed onto disk. You must re-supply the driver disk at this point. Failure to do so will mean that the installation will not contain the new drivers. After this step, no further action is required.
If the installer fails to load the new driver from the driver disk, it is likely to be because an earlier version of the driver has already been loaded. In general, this is because a hardware component is present that is supported by the version of the driver that ships as part of XenServer (even if another component is present that requires a newer version of the driver). To avoid the existing driver being loaded, use the following procedure.
- Reboot the host, leaving the XenServer installation CD-ROM in the drive.
- At the boot: prompt, type:
shell
- You will now be presented with a command prompt. Type the following:
rmmod be2net
If this succeeds (i.e. there are no error messages printed), the installer's versions of the drivers have been unloaded. If error messages are presented, it is likely that other drivers depend on one or more of the drivers you are attempting to unload. If this is the case, please contact Citrix Technical Support. - Type
exit
or press Control+D on your keyboard, to return to the installer. - Use the procedure described above to provide the driver disk to the installer, which should now load correctly.
Installing the Update by using the xe Command Line Interface
Perform the following steps to install the update remotely using the xe CLI:
Emulex Drivers For Linux
- Download the update to a known location on a computer that has XenCenter installed.
- Upload the update:
xe update-upload file-name=driver-emulex-be2net-11.2.1226.2.iso
Note: The UUID of the update is returned when the upload completes.
- Apply the update:
xe update-apply uuid=57a9be94-33da-4f0a-82e1-23af1a9ccbcf
- To complete the installation, restart the host. This ensures that the driver loads correctly.
Files
Update Files
| Component | Details |
|---|---|
| Filename | driver-emulex-be2net-11.2.1226.2.iso |
| File sha256 | f63f0ec2ed11ac51817b4c04aad72295d85bf74965af089a01c307bbb8c43459 |
| Source Filename | driver-emulex-be2net-11.2.1226.2-sources.iso |
| Source File sha256 | 73d9c059726e20b17a8c5c9cbe42f7149f50b1e68ee6ebaaf67e2ac51a2ee827 |
| Zip Filename | driver-emulex-be2net-11.2.1226.2.zip |
| Zip File sha256 | bf3b84f09eb693b7c8b9ad1456cd40e39030b667cfa53382fa14b3972fdc2939 |
| Size of the Zip file | 135.27 MB |
RPMs Provided
| RPM Name |
|---|
| emulex-be2net-11.2.1226.2-1.x86_64.rpm |
More Information
For a list of the driver versions and the latest driver disk updates available, see Driver versions for XenServer and Citrix Hypervisor.
Emulex Drivers For Vmware Esxi User Guide
If you experience any difficulties, contact Citrix Technical Support.
Emulex Oneconnect Driver
For information on how to build driver disks, refer to Citrix XenServer Supplemental Packs and the DDK Guide .